Jeep JK Weld-On Rear Track Bar Bracket 07-18 Wrangler JK/JKU Synergy MFG
Synergy Jeep JK Weld-On Rear Track Bar Bracket to replace the thin and weak factory bracket
Fits:
- 07-18 Jeep Wrangler JK
- 07-18 Jeep Wrangler Unlimited JK
Details:
- Synergy JK Weld-On Rear Track-Bar Bracket
- Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
- Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
- Multiple Track-bar holes for suspension adjustments
- Designed to fit stock JK axle tubes, 3.150 inch diameter
- Will fit other diameter axle tubes with minor trimming
- Track bar relocation bolt holes are 2.900 inch 3.713 inch and 4.525 inch above the stock track bar mounting location
Note:
- Requires the use of a minimum 3 inch bump stop spacer for clearance with the exhaust. When using a lower relocation bolt hole or aftermarket exhaust, a shorter bump stop spacer may be used7
WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.