Spicer 210121-1X Driveshaft Center Support Bearing for TBD Splines

  • $55.99
    Unit price per 

Only 2 left!

Product Details:

  • Driveshaft center support bearing (also known as a driveshaft carrier bearing) for two piece driveshafts
  • 1.968" ID (dimension 'A' on the diagram)
  • 7.620" bolt center to center (dimension 'D' on the diagram)
  • 1710 series

Parts Included:

  • (1) bearing
  • (1) large dust slinger
  • (1) small dust slinger


  • TBD


  • Dana Spicer

Part Number:

  • Dana Spicer 210121-1X

Installation Details:

  • For fixed yoke two piece axle shafts the nut holding the yoke on is typically a 1-5/16" (or 33 MM)
  • Mark the yoke to driveshaft orientation before removing!!!  This helps maintain yoke phase and the balance of the shaft to minimize vibrations
  • Strap is marked with an arrow and 'FRT' to indicate the orientation to install the bearing
  • Larger slinger is installed on the driveshaft side
  • Small slinger is only used on slip yoke style two piece driveshafts
  • Apply thread locker Loctite 263 to the threads and nut before assembly
  • Torque the nut to 250 ft*lb
  • 6 month warranty and case by case basis.

⚠WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.