Dana 30 Ring and Pinion High Pinion 3.73 Thin Uses 3.73 and Up Carrier With Install Kit

Product Details:

• Dana 30 3.73 ring and pinion ratio
• High pinion
• 181 mm ring gear
• 7.13" ring gear
• Thin ring gear
• 3/8"-24 threads in ring gear
• 3.73 and up carrier required
• 1.375" diameter pinion
• 26 spline pinion

Parts Included:

• (1) ring and pinion
• ring (40627)
• pinion (40626)
• (1) pinion inner pinion bearing (Spicer 706015X)
• (1) pinion outer pinion bearing (Spicer 706030X)
• (1) pinion seal kit (Spicer 701022X)
• (1) pinion seal (Spicer 44895)
• (1) pinion slinger (Spicer 30764)
• (1) pinion outer bearing thrust washer / oil slinger (Spicer 13575)
• (1) pinion baffle (Spicer 32349)
• (1) shim kit (Spicer 701015X)
• (1) pinion depth shim kit (~2.375" ID and ~2.828" OD)
• (8) .003" (Spicer 31402-1)
• (6) .005" (Spicer 31402-2)
• (4) .010" (Spicer 31402-3)
• (1) pinion preload shim kit (~1.125" ID and ~1.750" OD)
• (4) .003" (Spicer 30207-1)
• (4) .005" (Spicer 30207-2)
• (4) .010" (Spicer 30207-3)
• (4) .030" (Spicer 30207-4)
• (1) carrier bearing shim kit (Spicer 701004X) (~1.770" ID and ~2.250" OD)
• (4) .003" (Spicer 30215-1)
• (4) .005" (Spicer 30215-2)
• (4) .010" (Spicer 30215-3)
• (4) .030" (Spicer 30215-4)
• (1) ring gear bolt kit (Spicer 701071-3X)
• (10) ring gear bolts (Spicer 41221)
• (1) pinion nut (Spicer 30185)
• (1) pinion washer (Spicer 30186)
• (1) 4WD actuator housing gasket (Spicer 41494)
• (2) c-clips (Spicer 42570)
• (2) cotter pins (Spicer 500025-10)
• (1) tube RTV sealant (Spicer 38615)
• There are NO carrier bearings in this kit
• There is NO gear marking compound in this kit

Fits:

• 1987 - 1995 Jeep Wrangler YJ with the Dana 30 high pinion front axle
• 1984 - 1999 Jeep Cherokee XJ with the Dana 30 high pinion front axle
• 1986 - 1992 Jeep Comanche MJ with the Dana 30 high pinion front axle

Brand:

• Dana Spicer

Part Number:

• Dana Spicer 706930-5X

• 6 month warranty and case by case basis.