Spicer 211359X Driveshaft Center Support Bearing for 1.500" Splines

Product Details:

• Driveshaft center support bearing (also known as a driveshaft carrier bearing) for two piece driveshafts
• 1.574" ID
• 6.620" bolt center to center

Parts Included:

• (1) bearing
• (1) large dust slinger
• (1) small dust slinger

Fits:

• Ford Super Duty F-250 and F-350 with two piece rear driveshafts
  
• TBD
  

Brand:

• Dana Spicer

Part Number:

• Dana Spicer 211359X

Installation Details:

• For fixed yoke two piece axle shafts the nut holding the yoke on is typically a 1-5/16" (or 33 MM)
• Mark the yoke to driveshaft orientation before removing!!!  This helps maintain yoke phase and the balance of the shaft to minimize vibrations
• Strap is marked with an arrow and 'FRT' to indicate the orientation to install the bearing
• Larger slinger is installed on the driveshaft side
• Small slinger is only used on slip yoke style two piece driveshafts
• Apply thread locker Loctite 263 to the threads and nut before assembly
• Torque the nut to 250 ft*lb

• 6 month warranty and case by case basis.